DIY Hardwood Floor Refinishing

Hardwood floor refinishing requires lots of diligence and hard work. Nonetheless, a refinished floor enhances and protects the beauty of your home. Hiring an expert to do the refinishing is costly for most homeowners. Therefore, taking hard floor refinishing as a DIY project is the most affordable option for most homeowners. The following procedure will help you refinish your hardwood floor:
1. Remove Old Finisheshardwood floor refinish
The first step is to get rid of the old finish through sanding the hardwood floors. To remove the old finish with ease consider renting a walk-behind floor sander with a rotating drum. To sand tight walls, corners and doorways rent a handheld power edge sander. Make sure you wear a dust mask, eye and ear protection for your safety before you start the sanding process.
2. Prep the floor for finishing
After completing the sanding, fill any cracks or spots using wood putty. Allow the putty to dry and then sand those areas lightly by hand using fine sandpaper. Wait for the dust to settle then clear all the dust from the floor, walls and molding. Start wiping the dust up from the molding, towards the walls and down to the floor. Use a regular vacuum cleaner with a dust filter to clear all the dust that has gathered on the floor.
Once you finish vacuuming grab a piece of tack cloth and wipe down the whole floor surface. The special cloth will help to catch all dust residue that may spoil the finish. Have multiple tack cloths to avoid using them beyond their capacity to hold dust residue.
3. Select the most suitable finish
There are different types of finishes to select from. The look of the floor you desire will determine the type of finish you choose. Polyurethane is water or oil based finish with various degrees of luster that produces a kind of plastic appearance. It tends to darken and is ideal for floors with high traffic and moisture.
Varnish is a type of finish that has a range of luster from matte to glossy. According to this maid service in Charlotte NC the surface is more durable if the finish has higher gloss. As time goes by varnish darkens. Spot repairs can be conducted on varnish.
The penetrating sealer exhibits the wood’s grain with its natural look. It protects the wood well, particularly when waxed. Its durability is much lesser than varnish or polyurethane. However, it is the least difficult to do spot repairs on.
4. Begin Sealingrefinishing
After sanding the wood surface becomes open which allows it to absorb moisture. Therefore to prevent this from happening, sealing must be done on the same day you complete sanding. Apply the sealer evenly using a sheepskin applicator. Take caution to avoid drenching into the wood with the excess sealer that leaves horrible spots.
5. Protect the Finish
Use fine steel wool (No.2) to buff the floor once the seal dries. Remove all the dust before applying the next finish coat using through vacuuming and wiping using a tack cloth. Then apply initial 2 coats of the chosen floor finish allowing enough drying time between the coats. Finally, apply the last coat and allow it to dry for at least 24hrs before you bring back the furniture.